zebris Medical GmbH
FDM-T Technical Data and Operating Instructions
Page 43/65
5.3
Gait Training Type D (daum ergo_run)
Accessories for gait training by visual stimulation with treadmill type daum ergo_run.
Assembly of the projector adapter
WARNING
Please regularly check (recommended after 25 operating hours
each) that all screws of the handrail and projector mount are tightly
fastened.
Required Tools: Allen Key 4mm, 5mm
To begin with remove the cover of the fixation screws
for the hand rails on both sides of the treadmill.
Attach the projector adapter to the main columns by utilizing
the screws supplied (bolts DIN 912 M6x45 with Allen screw).
Use an Allen key size 5mm for this task.
Next remove the screws already mounted to the adapter.
Use an Allen key 4mm for this task.
Place the projectors stand on the adapter as illustrated left
hand side and attach it with the screws removed previously.
After attaching the covers the stands assembly is finalized.
For the final assembly of the projector to its stand please refer
to the user manual of the projector manufacturer.
