19
time is near 12 Sec. when the 3 ON
and the 4 is OFF auto-close time is
near 24 sec. when the 3 and the 4 is
all in ON position, the auto-close time
is near 36 sec.
4
ON
OFF
(see Fig.13D)
NOTE:
(1) You must follow the operating instruction as above, any
wrong operation is not allowed during setting. If your device
responds to your requested function correctly, you have set
the function successfully, otherwise repeat the above setup
instruction until your device responds to your expected
function.
(2)
If the gate can not be moved, please check whether the gate
is obstructed or the gate is too weight.
Activities Covered in this section
Remote transmitter:
With each press of the button, the gate will
close, stop, open or stop cycle.
(Single-button mode)
Three-button mode external button switch (not supply):
press ‘OPEN’ button, the gate opens. Press ‘STOP’ button, the
gate stops. Press ‘CLOSE’ button, the gate closes.
Single-button mode external button switch / keypad (not
supply):
With each press of the button, the gate will close, stop,
open or stop cycle.
Auto-close function:
This feature can be selected to make the
gate stay open for some seconds before it automatically closes.
The auto-close time can be adjusted to between 12, 24 and 36
seconds.
Safe guard (Infrared photocell):
If infrared beam is interrupted
during closing, the gate will reverse and go open immediately.
This feature will not function if the gate is in fully opened and
closed positions or during opening.
PY-500ACU/PY-800ACU SLIDING GATE OPERATOR
