Page 41
Upcoming products from Zed Audio
We have some new products which will be introduced in late early 2010. We urge our
customers to send us their requests for products which they would like to see in the line
up.
The first is a 4 channel amplifier, rated at 150w per channel at 4 ohms. It has some unique
features never seen on a multi channel amplifier.
A mono block will also be added to the line up with some unusual features. Power output
into 4 ohms will be 1000 watts
A hybrid amplifier incorporating my favourite amplifying devices namely TUBES. Since I
was brought up on tubes, no I did not eat them as a child, but I “cut my teeth” in
electronics on these wonderful glowing glass bottles. This amplifier will feature a complete
100% tube front end and the power amplifier will incorporate tubes right up to the output
stage. The output devices will be high speed Sanken or Toshiba devices which in my
opinion are the best bi-polar devices around. Cost will be an object as part of my
philosophy is to bring reasonably prices gear to the market. Power will approximately
125w per channel and the name of this amplifier is... Well we have not come up with a
suitable name yet. All suggestions are welcome. This amplifier is not intended for sub
woofer duty and so will incorporate crossovers with a 12dB/octave slope. The consumer
who will use this type of amplifier will typically not be a “bass head” and so steep slope
crossovers are not required.
The last product is a stand alone TUBE crossover. This will be a four (4) channel unit with
low, band and high pass functions. Again all at 12dB/octave. The name of this crossover
is “TubeX”
Never forget one thing, the best sounding crossover is, “no
crossover at all”.
