ZyPerUHD60
ZyPer Management Platform
Installations may require a ZyPer
Management Platform (ZMP). This device
controls the operation and manages the
connectivity between endpoints. The
management platform is a hardened
controller node that must reside on the
same logical network as the ZyPerUHD60
Encoders and Decoders. It runs a ZeeVee
application as its sole function. The
application presents an API to potential
third party management platforms as well
as hosting its own management application.
The purpose of the Management Platform is to interface user operational requests into the
specific device-level control needed to effect connectivity changes, screen management,
interface management, and distribute software and control data to all the endpoints of the
overall system. The ZMP is the entity that insures all the endpoints, are accounted for,
operating properly, and performing the correct operation at the correct time.
Further, the ZMP is the element that guarantees security, manages access to the overall system
and prevents rogue listeners or observers from snooping or spoofing unwanted content.
Two ZMP devices may be deployed in a redundant configuration to provide for fault tolerant
control of the greater ZyPerUHD60 overall system.
Operation of the ZMP, the management application, and the ZyPer-API are beyond the scope of
this manual and are documented separately in far greater detail in the
ZyPer Management
Platform User Manual
. Documentation can be downloaded from the ZeeVee website.
https://www.zeevee.com/documentation-all-products
Rev: 20231115
Page of
8
77
User Manual
