ZyPerUHD60
Please consult the
ZyPer Management Platform User Manual
for additional details on
switching/routing video from sources to displays.
https://www.zeevee.com/documentation-all-products
To set up ZyPerUHD60 in a point-to-point environment, you have to:
• Connect the Encoder and Decoder to each other via the network cable. Video and
audio will automatically begin streaming.
USB Details
The ZyPerUHD60 provides for USB-over-LAN communications.
The ZyPerUHD60 Encoder contains a USB Hub while the ZyPerUHD60 decoder contains a
USB Host.
Device types include the following:
USB Keyboard
USB Mouse
USB Touch Panels
USB Cameras
USB Pen Table & Signature Pad
USB Card Readers
USB Flash Memory
USB Hard Disk
USB CD-ROM
A ZyPerUHD60 System can support an unlimited number of decoders connected to an encoder
for USB Connections. However, there are practical and bandwidth limitations based on the 1G
network.
The maximum number of USB Hops allowed is 7. However the ZyPerUHD60 itself counts as 2
Hops making the real Hop limit = 5.
Note:
Only the UHD60 Encoder counts against Hop limit. Encoder = 2 Hops, Decoder = 0 Hops.
Rev: 20231115
Page of
55
77
User Manual
Encoder
Decoder
