ZyPerUHD60
Care should be taken to not spray cleaner directly on to the unit or into the vents to avoid
liquid ingress and damage to the internal electronics.
CAUTION:
Do not apply or spray liquid directly on
to the unit’s exterior as excess liquid may cause
damage to internal electronics. Apply the liquid to
the cleaning cloth first.
3. Repeat with water-moistened cloth only.
4. Wipe with a dry cloth
5. Air vents shall be checked to make sure that they are free of accumulated lint or blockages.
Should the air vents appear clogged use a vacuum cleaner with a soft-bristle brush
attachment to loosen and draw the debris out of the vents and away from the unit.
Do not loosen and blow the debris in to the unit as internal buildup of debris will degrade
the ability of the unit to cool itself and reliability may be adversely affected.
Do not apply power if there is any evidence of fluid in the interior of the unit.
ZyPerMP Specific Cleaning Procedure
The ZyPerMP control unit is not designed to be placed in an environment
that would subject it to impurities that require as frequent cleaning as the
encoder and decoder units. Should the ZyPerMP unit need cleaning, the
same procedures apply as enumerated above, only a very sparing amount
of cleaner should be applied to the cleaning cloth.
Rev: 20231115
Page of
61
77
User Manual
