POSITIONING YOUR APPLIANCE
To get the most out of your appliance and enjoy the highest standards of comfort, we recommend that you install the appliance near places with
high heat loss (windows, doors, etc.) wherever possible.
You will find a complete set of assembly instructions in your appliance’s box.
CONNECTING THE APPLIANCE
The technical specifications of your radiator are shown on its nameplate. Please note these down before installing it and before requesting any
after-sales assistance.
When connecting the appliance to the mains, you must observe:
- the voltage indicated on the nameplate;
- conventional wire colour coding:
blue or grey - neutral
brown or black - live
green or yellow - earth
IP: protection level of your appliance against the
ingress of solid foreign bodies and water spray
Voltage and power required for installation
Appliance reference number
Class I & Class II
OF: serial number
Manufacturer code
IP XX
230V ~ XXXXW
XXX–XXX–XXX–XX
OF: XXXXXXXXXX XXXXXX
N CONSTRUCTEUR XXXXXX
Class I : with earth
Class II : Double insulated
(no earth)
N (blue or grey)
L (brown or black)
E (green or yellow)
Neutral
Live
Earth
ROUTINE MAINTENANCE OPERATIONS
Before carrying out any maintenance operation on your appliance, ensure that it is switched off.
High-quality materials and surface treatment protect your radiator.
To maximise the service life of your radiator we recommend you take the following precations:
- to make the most of the performance of radiators containing a heat transfer fluid, it is advisable to check after five or six
years of operation the quality of the fluid and replace it if necessary.
- never use abrasive or corrosive products on the outer surfaces of the appliance (except the electrical parts); use warm,
soapy water.
- use a soft, dry cloth without any solvents to clean the control box.
TROUBLESHOOTING
Should your radiator fail to function, check that your radiator is properly connected to an appropriate power supply.
If your radiator is connected to a master device, timer or programming unit, please refer to the manufacturer’s instructions.
Nonetheless, should you fail to solve the problem encountered, please contact your supplier’s after-sales service for assistance.
Concept House
Watchmoor Point
Camberley
Surrey GU15 3AD
Tel:
Fax: 01276 24058
retailsales@zehnder.co.uk
www.zehnder.co.uk
Registered in England: 2296696
01276 605800
Zehnder Group UK Ltd
Issue 1.0
Zehnder Alban Electric
