background image

14

15

Z23720

Z23720

4. Maintenance and troubleshooting 

tips

4.1 Routine maintenance operations

High-quality materials and surface treatment protect your radiator against 

corrosion and impacts.

To maximise the service life of your radiator, we recommend you take the 

following precautions:

- Never use abrasive or corrosive products on the outer surfaces of the appliance 

(except the electrical parts); use warm, soapy water.

- Use a soft, dry cloth without any solvents to clean the control box.

4.2 Troubleshooting

Problem

Diagnosis

Steps to take

The radiator does not 
work.

The radiator is not
powered.

Make sure the radiator is
correctly connected to the 
electricity supply. Contact 
your dealer if this is not the 
case.

The radiator is in
standby mode.

Turn on the radiator.

The setpoint temperature 
is below the room
temperature.

Increase the setpoint
temperature (COMFORT 
mode).

The screen displays 

shows “ErrS"

The temperature sensor is 
damaged or the tempera-
ture is outside operating 
limits.

Contact your dealer.

5. Services and guarantee

After-sales service

If your appliance stops working or you require spare parts, contact your installer 

or dealer.

Prior to making contact and to ensure your problem is dealt with quickly and 

effectively, please make a note of:

- the details shown on the appliance’s nameplate;

- the sales reference for your appliance shown on your dated purchase invoice.

Guarantee

(See general conditions of sale for your country)

The heating body of your electric radiator is guaranteed against manufacturing 

defects for five (5) years from the date of purchase, while the electrical components 

are guaranteed for two (2) years.

It complies with the EMC Directive: 2004/108/EC regarding electromagnetic 

compatibility of equipment, with Low Voltage directive: 2006/95/EC regarding electrical 

equipment designed for use within certain voltage limits, and with European standards 

EN 60.335.1 and EN 60.335.2.30, and subsequent amendments. 

Dated proof of purchase must be presented to activate the guarantee. The 

guarantee does not cover radiator transport, removal and installation costs.

The guarantee shall not apply if the appliance is installed, used or maintained 

in a way that does not comply with standards in force in the relevant country, good 

professional practice, or the manufacturer’s instructions.

Environmental regulations

RoHS: complies with Directive 2011/65/EU

WEEE: complies with Directive 2002/96/EC

Disposal of end-of-life electrical and electronic appliances. 

This symbol 

indicates that this product should not be disposed of with household waste. 

It must be taken to a suitable collection point to be recycled. By disposing of 

this product correctly, you will help prevent potential negative consequences 

for the environment and human health.

Summary of Contents for Bisque 4FE-40-106/F










Reviews: