3
EN - 16 - For the installer
3.1 ComfoAir
confi guration
The standard ComfoAir confi guration consists of:
• External casing (A) of coated sheeting;
•
Interior (B) of high-quality, expanded polypropylene (E)PP;
•
4 connections (C) for the air ducts;
•
2 fi lters (D) for air purifi cation. Filter classifi cation: Supply Air G4, Exhaust Air G4;
•
2 energy-effi cient DC motors (E) with high-effi cient fan;
•
HR (High Effi cient) heat exchanger (F);
•
Connector panel (H2) with connections for the CC Ease panel, the enthalpy exchanger and the 0 – 10V
control sensor;
•
PCB panel (H1) with connections for the fans, the bypass, the Pre-heater, temperature sensors (T1 to T4), the
3-position switch with or without malfunction and fi lter indication (optional) and the bathroom switch (optional);
•
Identifi cation plate (I) detailing information on the ComfoAir (not visible);
•
Condensation drain (J) to drain the condensation of the warm return air;
•
Sticker (K) detailing the air connections (not visible);
•
3 or 5 wire 230V connection (L);
•
Display (G) to read data, and for programming procedures;
•
2 Filtercaps (M);
•
4 Ceiling mounting brackets (N) or 1 Wall mounting bracket (not visible).
3 For the Installer
This chapter describes how to fi t the ComfoAir.
