1 - EN
Preface
Carefully read this manual before use.
This manual provides all the information required for
safe and optimal installation and maintenance of the
ComfoAir 200. It is also intended as a reference for
servicing, so that this can be carried out in a respon-
sible manner. The device is subject to continuous de-
velopment and improvement. As a result, the Com-
foAir 200 may slightly differ from the descriptions.
1 Introduction
The device's name is ComfoAir 200. In the following
it will be referred to as ComfoAir.
The ComfoAir is a balanced ventilation system with
heat recovery in order to create healthy, balanced
and energy-efficient ventilation in houses. The Com-
foAir has a CE marking on the identification plate.
The identification plate can be found on top of the
ComfoAir.
1.1 Warranty and liability
1.1.1 Guarantee conditions
The ComfoAir is covered by a manufacturer’s war-
ranty for a period of 24 months after fitting up to a
maximum of 30 months after the date of manufac-
ture. Warranty claims may only be submitted for ma-
terial faults and/or construction faults arising during
the warranty period. In the case of a warranty claim,
the ComfoAir must not be dismantled without written
permission from the manufacturer. Spare parts are
only covered by guarantee, if they were supplied by
the manufacturer and have been installed by an ap-
proved installer.
The warranty becomes invalid if:
■
The guarantee period has elapsed;
■
The device is used without filters;
■
Parts are used that have not been supplied by the
manufacturer;
■
Non-authorised changes or modifications have
been made to the unit.
1.1.2 Liability
The ComfoAir has been designed and manufactured
for use in balanced ventilation systems incorporating
Zehnder heat recovery systems. Any other applica-
tion is seen as inappropriate use and can result in
damage to the ComfoAir or personal injury, for which
the manufacturer cannot be held liable.
The manufacturer is not liable for any damage origi-
nating from:
■
Non-compliance with the safety, operating and
maintenance instructions in this manual;
■
The use of components not supplied or recom-
mended by the manufacturer.
Responsibility for the use of such components
lies entirely with the installer;
■
Normal wear and tear.
