background image

16 - EN

3.2.4  FILTERS

Menu item

Function

FILTER STATUS

To view within how many days the filters need to be changed.

CHANGE FILTERS

To change the filters, follow the instructions on the display.

3.2.5  BASIC OPTIONS

Menu item

Function

CLOCK

To set the actual date and time.

LANGUAGE

To set the language on the display. (Default: English)

BRIGHTNESS

To set the level of brightness on the display.

3.2.6  RESET ALL TASKS

Menu item

Function

RESET EXCL SCHEDULE

To reset all the tasks, excluding the set scheduler(s).

RESET INCL SCHEDULE

To reset all the tasks, including the set scheduler(s).

3.2.7  ADVANCED SETTINGS2

Menu item

Function

SENSOR VENTILATION2

To set the airflow automatically according to the built-in sensors of the unit. (demand control)

TEMPERATURE PASSIVE2

Increase the airflow automatically to maximise passive cooling or heating under favourable conditions. 
(bypass)

  ON: the unit will increase the airflow in the AUTO mode and MANUAL mode if requested by the 

built-in sensors;

  AUTO ONLY: the unit will only increase the airflow in the AUTO mode if requested by the built-in 

sensors;

  OFF: the unit will ignore the request to increase the airflow by the built-in sensors. (default setting)

TEMPERATURE ACTIVE2

Increase the airflow automatically to maximise active cooling or heating under favourable conditions. 
(ComfoCool Q600 / pre-heater / post-heater)

  ON: the unit will increase the airflow in the AUTO mode and MANUAL mode if requested by the 

built-in sensors;

  AUTO ONLY: the unit will only increase the airflow in the AUTO mode if requested by the built-in 

sensors; 

  OFF: the unit will ignore the request to increase the airflow by the built-in sensors. (default setting)

HUMIDITY COMFORT2

Increase the airflow automatically to maintain a comfortable humidity level under favourable 
conditions. (By maximizing passive humidification or dehumidification)

  ON: the unit will increase the airflow in the AUTO mode and MANUAL mode if requested by the 

built-in sensors;

  AUTO ONLY: the unit will only increase the airflow in the AUTO mode if requested by the built-in 

sensors; (default setting)

  OFF: the unit will ignore the request to increase the airflow by the built-in sensors.

HUMIDITY PROTECTION2

Increase the airflow automatically to avoid moisture problems.

  ON: the unit will increase the airflow in the AUTO mode and MANUAL mode if requested by the 

built-in sensors; (default setting)

  AUTO ONLY: the unit will only increase the airflow in the AUTO mode if requested by the built-in 

sensors; 

  OFF: the unit will ignore the request to increase the airflow by the built-in sensors.

The airflow will be increased if the outdoor humidity level is lower than the indoor humidity level and 
the relative humidity of the indoor air exceeds a level above which moisture problems can occur.

2 This menu is only visible when the advanced mode is active.

Summary of Contents for ComfoAir Q 350 ST





































Reviews: