12 EN
Time delay values
Submenu
description
Minimum Maximum Factory reset
P26
Note:
only applies to
systems fitted with
an rF switch.
Deactivation delay for ventilation setting
3 (using “
”).
• After pressing AND HOLDINg "
" (< 2 sec.), the ventilation unit
will switch to the HIGH SETTING
and automatically switch back to the
set level after ‘x’ minutes.
If a 3-position switch is operated during
the time delay mode, then the ventila-
tion unit switches immediately to the
selected ventilation setting.
1 Min.
120 Min.
30 Min.
P27
Time for the temporary high setting.
• If you engage ventilation setting 3,
the ventilation unit switches to the
high setting for “
” minutes and
then switches back automatically to
the normal ventilation setting.
If a 3-position switch is operated during
the time delay mode, then the ventila-
tion unit switches immediately to the
selected ventilation setting.
0 Min.
120 Min.
30 Min.
P29
(Optional)
Note:
only applicable to
installations with a
corded ComfoHood
with temperature
sensor.
Setting the ComfoHood ventilation
levels.
• When the ComfoHood is switched
on, its ventilation levels can be set
x% higher than the corresponding
'normal' ventilation levels.
1%
99%
10%
Summary of Contents for ComfoControl Luxe
