EN 14
Registering via CC-Luxe
1. Press “
Settings
”.
- A new menu will be displayed on the screen.
2. Press “
System
”.
- A new menu will be displayed on the screen.
3. Press “
OK
MENU
·
·
·
”.
- The second section of the menu will be
displayed on the screen.
4. Press “
Service login
”.
- A code entry screen will be displayed on the
screen.
5. Enter the code “3520”.
- A new menu will be displayed on the screen.
“Artic” is selected/white.
6. Press “
OK
MENU
·
·
·
”
- Ventilation will be selected/white.
7. Press “
OK
MENU
·
·
·
”.
- A new menu will be displayed on the screen.
“P3 Ventilation” is selected/white.
8. Press “
OK
MENU
·
·
·
” 3 times.
- “P6 options” will be selected/white.
9. Press “
OK
MENU
·
·
·
”.
- A new menu will be displayed on the screen.
“P60 Base exchanger” is selected/white.
10. Press “
OK
MENU
·
·
·
”.
- Current setting of P-menu P60 will be
displayed on the screen.
11. Press“
OK
MENU
·
·
·
” until “1” is displayed on the
screen.
12. Press “
OK
MENU
·
·
·
”.
- A new menu will be displayed on the screen.
“P60 Base exchanger” is selected/white.
13. Press “
OK
MENU
·
·
·
” 2 times.
- The main screen will be displayed on the
screen.
5.4 Adjusting the control temperatures
The ComfoAir Luxe switches the fluid pump of the
Comfofond-L on and off at pre-set temperatures.
These desired temperatures can be set in the
P-menus "P62" and "P63" of the ComfoAir Luxe.
•
In the Winter mode, the ComfoAir Luxe will
switch around the temperature that is set in
P-menu "P62".
The best setting for P-menu P62 is a few
degrees below the lowest fluid temperature. The
lowest fluid temperature is a few degrees below
the average local annual temperature.
•
In the Summer mode, the ComfoAir Luxe will
switch around the temperature that is set in
P-menu “P63”.
The best setting for P-menu P63 is a few
degrees above the set comfort temperature of
the ComfoAir Luxe.
The minimum and maximum values for the
available settings parameters are preset in
the software of the ComfoAir Luxe.
The fluid pump of the Comfofond-L will be activated
if:
• The temperature sensor of the Comfofond-L
measures a temperature lower than the
temperature that is set in menu P62 when in
Winter mode;
• The temperature sensor of the Comfofond-L
measures a temperature higher than the
temperature that is set in menu P63 when in
Summer mode.
The fluid pump of the Comfofond-L will be
deactivated if:
• The temperature sensor of the Comfofond-L
measures a temperature higher than the
temperature that is set in menu P62 when in
Winter mode;
• The temperature sensor of the Comfofond-L
measures a temperature lower than the
temperature that is set in menu P63 when in
Summer mode.
An installation report has been included at
the rear of this manual which can be used to
note the set temperatures.
Summary of Contents for ComfoFond-L
