En
gl
ish
-29-
If you entered correct value of your position, place
your cursor on Compute and press OK key.
Then
DX 2000
show the exact information of
antenna position.
Elevation angle : 32.4º
Note :
North
Azimuth : 173.4º
After you adjusted your antenna to correct position
you can check the signal strength by entering the
Signal level button on this screen to check whether
you correctly entered value and positioned
the antenna.
If the signal strength and quality is higher than 50
your installation is ok..
Antenna Direction help
Although you entered correct value in Antenna
Set up menu, if your antenna is positioned
incorrectly, you could not receive signal form the
Satellite.
So
DX 2000
provides Antenna Positioning
Help in order for you to have exact information
for the position of your antenna.
To get into this help function press MENU button
on RCU and confirm the menu “Antenna Direction
Help” with OK,
First select your desired Satellite name and then
the location of selected satellite will be displayed.
In case of that the location of the satellite is
changed, you can re-set up the new location.
Second, enter the country and city of your
location, then the value of Longitude and Latitude
of your location will be shown in the lines below.
