- 15 -
4.3.1 Add Transponder
In Manual Search menu, press Add TP key
(White colour key) on the RCU, the screen will
display a submenu, in this sub menu, you can
add the frequency and symbol rate, select Hor
or Ver polarization mode to add new
transponder.
4.3.2 Delete Transponder
Delete TP :
If you want to delete a
Transponder, please select the Transponder
which you want to delete and then press
Green button
on the RCU. A confirm message
box will be displayed. Confirm by YES to
delete.
4.3.3 Set PID
If you want to search only one specific channel,
from which you have all details set PID( Packet
Identifier) manually, Press Set PID key ( Yellow
color key ) on the RCU, the screen will display
a sub-menu, enter the current value and select
OK .
4.4 Motor Setting
Select Motor setting than press OK key, the
screen will shown as below:
1. Satellite Name: Select first satellite which
you want.
2.
Motor Setup:
Select Disable or Enable. If
you select Enable option, you can operate
as below.
3.
Transponder:
Select desired transponder.
4.
Move:
Use VOL- and VOL+ keys on the
RCU to let motor move to west or east
setup.
5.
Execute command “
Save Position”.
