5
Safety and environmental instructions
In accordance with current regulations, the appliance must be installed and maintained exclusively by qualified technical
personnel authorised for this type of appliance and work.
Use the necessary Personal Protective Equipment to avoid damage related to electrical, mechanical (injuries from
contact with metal sheets, sharp edges, etc.), acoustic risks, etc.
Do not use the appliance for any purpose other than that for which it is designed. This device may only be used to
convey air free of hazardous compounds, construction dust, etc.
Move the appliance as described in the handling section.
Connect to earth in accordance with the applicable standards. Never switch on an unearthed appliance.
Before working on the unit, shut off the power and wait for the moving parts of the ventilation unit to come to a
complete stop before opening the doors.
During operation, inspection panels, doors and hatches must always be fitted and closed.
The unit must only be switched on and off via the proximity switch.
Safety and control equipment must not be removed, short-circuited or disabled
When working on the unit, be aware of the temperature that some components can reach (water coil or electrical
resistors).
The installation must comply with the fire safety regulations.
All waste production must be treated in accordance with the regulations in force.
It is the responsibility of the installer of the equipment to ensure compliance with the regulations on noise emissions
inside the building and to adapt the installation and placement conditions if necessary.
We decline all liability for damage resulting from misuse of the equipment, unauthorised repair or modification or failure
to observe these instructions.
Danger and warning:
■
Operation or situation that may present a danger
■
Warning about the instructions to be followed
Reading the documentation that accompanies the product is mandatory.
Safety and environmental instructions
Zehnder Eversky
