Zehnder Rittling FC series Installation, Operation And Maintenance Manual Download | Manualshive

Page: 31 / 46

background image

29

Electrical
connections

The unit serial tag lists the unit
electrical characteristics such
as the required supply voltage,
motor and heater amperage and
required circuit ampacities. The
unit wiring diagram shows all
unit and field wiring. The installer
must be familiar with the wiring
diagram before beginning any
wiring as the wiring can change
from project to project.

Electrical shock can cause
personal injury or death. When
installing or servicing system,
always turn off main power to
system. There may be more than
one disconnect switch.
Thermostat “OFF” should not be
used for disconnect purposes.

All field wiring connecting to
this type of unit must by 105°F
rated copper conductor and
should be in accordance with the
National Electrical Code and any
applicable local codes. Branch
circuit fusing and electrical
disconnect means, if required,
must be furnished and installed
by others. All unit-mounted
control components and
electrical heater elements, when
furnished, are factory wired to
the junction control box located
in the electrical end pocket of
painted, finished units or on the
side of hideaway units. Remote-
mounted control components
are shipped loose for field
installation and wiring and are
to be wired in strict accordance
with the wiring diagram. Failure
to do so could result in personal
injury or damage to components
and will void the manufacturer
warranty.

All wiring connections should
be checked prior to start-up to
ensure connections have not
come loose during shipment or
installation, minimizing problems
during start-up.

The fan motor(s) should never
be controlled by any wiring or
device other than the factory
supplied switch or thermostat/
switch combination without
factory authorization.

Consult the factory wiring and
valve package diagrams when
installing a changeover switch.
The switch should always be
installed upstream of the control
valve on a pipe that will have
constant flow regardless of the
control valve position, allowing a
true water temperature reading
at all times. A bleed bypass may
be required to guarantee proper
changeover switch operation.

The applicable wiring diagram
ships with each unit and must
be strictly followed. Field
power supply wiring should be
through end pocket openings
or knockouts in the supplied
junction boxes.

All field wiring should be done
in accordance with governing
codes and ordinances. Any
modification of the unit wiring
without factory authorization will
void the warranty and nullify any
agency listings.

Zehnder Rittling assumes no
responsibility for any damages
and/or injuries from improper
field installation and/or wiring.

Electrical connections

«
...
29
30
31
32
33
...
»

Summary of Contents for FC series















































Reviews:

No comments

Related manuals for FC series

Brand: ebm-papst Pages: 11

Brand: Nibe Pages: 24

Brand: Be Cool Pages: 17

Brand: Dantherm Pages: 108

SHOWROOM CELANO FP8062B Series

Brand: Fanimation Pages: 40

Brand: Zelmer Pages: 52

Brand: Harbor Breeze Pages: 43

Brand: Craftmade Pages: 18

Brand: Orbegozo Pages: 29

Brand: IBC Pages: 5

Brand: Sabiana Pages: 20

FFM0180HVCR - 10-03

Brand: Haier Pages: 7

FDM112W - 01-05

Brand: Haier Pages: 5

FBP020W - 01-05

Brand: Haier Pages: 5

FSM016M - 10-04

Brand: Haier Pages: 6

FTM348 RBPG - 10-04

Brand: Haier Pages: 6

FSPH116 - 01-05

Brand: Haier Pages: 4

FTM001TG - 10-03

Brand: Haier Pages: 7

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands