4
Greenwood HumidiSMART
TM
monitors the ambient humidity within the wet room
environment and looks for short peaks of humidity made by either cooking,
showering or bathing. This smart technology ensures that your OF100GIP is only
running when required, removing nuisance running noise and unnecessary
energy wastage typically associated with increases to background humidity
which naturally occurs with the changing seasons.
If your fan has been commissioned in “continuous mode”, a boost speed
facility is provided to increase the ventilation rate during peak times, helping
to provide a comfortable indoor environment. This can be activated via the
following methods:
• Integral pullcord
• A ‘Switch Live’ light switch (see section - 2.6 Electrical)
• An alternative boost switch (not supplied) - (see section - 2.7 Electrical)
If your fan has been commissioned in “intermittent mode”, the fan can be
manually activated by either the pullcord or via the switch live.
Note:
If required, the pullcord can be removed within wall/window installations,
however
the pullcord must be removed within ceiling installations.
Packaging Includes –
1 x OF100GIP Unit
1 x Loose item set consisting of:
• 1 x SELV Box top
• 2 x Pan head screws
• 4 x Counter-sunk screws
• 6 x Rawl plugs
• 4 x SELV Box retaining screws
1 x Installation Instructions
1 x Commissioning & Inspection Record
Ancillary Items Required:
Round ducting (100mm) or
Flat duct (110 x 54mm) for up to 30 l/s airflow or
Flat duct (204 x 60mm) for up to 60 l/s airflow
100mm grille & appropriate boost switch (for example GS2)
Window mounting kit (EWOF100)
Picture Frame Adapter -150mm to 100mm conversion (PFAOF100)
1.1.4
1.1.5
