The flexible cable supplied with your appliance is designed to be connected to the mains via a junction box that must be placed behind the
appliance.
In a kitchen or bathroom, the junction box must be positioned at least 25cm from the floor.
The appliance must be installed as described in this document and in accordance with the applicable European and local standards as well as the
rules of good professional practice.
IMPORTANT:
The example shown only concerns a bathtub. For other bathroom fixtures please consult your installer.
IMPORTANT:
The system must be fitted with an omni-polar circuit-breaker with a minimum contact opening of 3mm.
To ensure your system is safe:
- ensure that an area of at least 50cm in front of the appliance is clear of objects which might hinder air circulation
(furniture, chairs etc.);
- position a shelf at least 10cm above the top of your radiator;
- use mounting screws suitable for your wall.
NOTE:
Electric towel radiators are designed to be covered safely. However, to ensure that your appliance works efficiently, you are advised not to
cover it completely. Doing so will increase the temperature and cause the internal cutout to turn off the appliance.
CAUTION
Always turn off the electricity supply (circuit-braker or remove the fuse before making any connections
15cm minimum
10cm minimum
Concept House
Watchmoor Point
Camberley
Surrey GU15 3AD
Tel:
Fax: 01276 24058
retailsales@zehnder.co.uk
www.zehnder.co.uk
Registered in England: 2296696
01276 605800
Zehnder Group UK Ltd
Issue 1.0
Zehnder Pera Electric
