Our products have been designed and manufactured in such a way to ensure that all the
quality, functionality and aesthetic requirements are met. We would like to congratulate
you on this great purchase and would like to wish you a pleasant use.
SAFETY REGULATIONS
Please read the below instructions thoroughly and study the images carefully.
1. Never use the device that is damaged in any way.
2. Please check if the tally voltage equals the voltage of the electric
installation in your home prior to connecting the device.
3. Please check regularly if the power wire is not damaged and if the
device can be used in a safe manner.
4.
Power wire is not subject to repair. Damaged power wire should be
replaced at the manufacturer’s or specialised repair shop
5. Always connect the device to the grounded installation (socket with
earthing pin).
For devices without the plug (ie. connected directly to installation),
please see below colour codes for each wire:
Colour
Letter code
Wire type
Brown
L
Live
Blue
N
Neutral
Yellow and green
PE
Earthing
6. The heating element is intended to work in a liquid agent environment. It is advised
not to turn the device on in dry conditions for longer than 5 seconds.
Do not touch metal parts – burning risk. Always make sure that the wire does not
touch the heating element that is hot.
7. The device must not be connected while being installed. Unplug the device or discon-
nect the power wire from electrical circuit. Put the casing on the body of the heating
element unit before plugging the device. It is necessary to secure the control panel
with the right tool in order for the device to work as required [4].
8. Do not open the casing.
9. Heating element’s electric output cannot exceed 100% heating output of the radiator
for the following parameters: 75/65/20°C.
10. Pressure inside the radiator must not exceed the pressure value recommended
by the radiator’s manufacturer or the pressure of 10 atmospheres for the heating
element. Exceeding of recommended pressures may result in the radiator or heating
element damage and cause possible threat for health, life and property.
11. An air pillow of the correct parameters should always be allowed for inside an
electric radiator (see → Installation).
12. In case of a dual fuel radiator (connected to the central heating system) one of the
valves should be left open prior to turning the heating element on and during its
operation in order for the excess water created due to its heat expansiveness to be
pushed out. Leaving both valves closed will result in excessive pressure growth which
may lead to damaging of the heating element or radiator (see → Dual fuel radiator/
Installation)
13. The device is intended for home use.
14. The device is not intended for use by children, persons with limited mental capacity
or those who do not have sufficient knowledge or experience required for handling
this type of equipment. In such cases, control or training by persons responsible for
safety of the above mentioned is required.
INTENDED USE OF DEVICE
Heating elements and control heads are electric heating devices and are intended for
installation and use in radiators used for heating interior spaces or drying towels or
clothes. Heating element and control head can be installed in a radiator connected to
the central heating system for use during the heating season as well as in an individual
electric radiator.
Heating elements are intended to operate in closed installation (not open to atmophere)
only.
en
