Preparations for use
14-Function Foot Control Panel, Wired or Wireless
Version 6.1
Page 48
G-30-1706-en
Place the foot control panel in the working position
•
Place the foot control panel in working position (1) by placing it flat on the
floor.
–
Working position: 0
°
to 10
°
–
Rest position: 45
°
to 90
°
•
Following an extended period of non-use, activate the foot control panel
by briefly pushing a button.
–
In rest position (2), the foot control panel hangs on the stand.
–
The foot control panel is non-operational in rest position. Energy
management switches to operating mode 4 or 5, see page 54, to save
energy.
–
If the foot control panel is placed in working position after an extended
period in rest position, a self-test is carried out. All status indicators are
illuminated briefly.
–
The "Radio link intensity" (4) and "Batteries" (5) status indicators do not
flash any more if there is no radio connection during wireless operation.
NOTE!
Operation of WLAN systems
Systems with WLAN (2.4 GHz band) may disturb the wireless operation of the
foot control panel.
•
Operate the systems with WLAN at a distance of at least one meter from
the foot control panel.
Summary of Contents for 304970-9100-000
Page 4: ...14 Function Foot Control Panel Wired or Wireless Version 6 1 Page 4 G 30 1706 en...
Page 76: ...Device data 14 Function Foot Control Panel Wired or Wireless Version 6 1 Page 76 G 30 1706 en...
Page 80: ...Index 14 Function Foot Control Panel Wired or Wireless Version 6 1 Page 80 G 30 1706 en...
