Version 05/2015
Fig.3
Front element
Front trim ring
Torx T4 M1.7x3.5
INR 534-466 (8x)
Torque 0.15 Nm
Compendium/matte box ring
Index mark
Fig.2
friction wrench
Assembly instruction for front group
1
Untighten the front trim ring with the friction wrench and remove it by
hand (Fig.2).
2
Undo the Torx T4 screws in the compendium/matte box ring and carefully
pull it off (Fig. 3).
3
Undo the inner Torx T4 screws, which hold the front lens element, and
remove this element (Fig.1).
4
Insert the new front element and tighten the Torx T4 screws.
5
Reinsert the compendium ring in the correct position [index marks on the
compendium ring and index ring aligned; cut-out in the compendium ring
and LDS contact socket aligned] (Fig.3) and secure it with the Torx T4 screws.
6
Reseat the trim ring [secure a straight position] and tighten it with the
friction wrench.
Flare Set User Manual
Fig.1
Inner Torx T4 screws
Torx T4 M1.7x6.0
INR 534-469 (6x)
Torque 0.15 Nm
