OPERATION
Carl Zeiss
Operating the motorized microscope via the touchscreen of the TFT display
Axio Imager
108
430000-7344-001
M70-2-0020 e 06/2009
•
Before you can save a fixed position, you need to set the desired
Azimuth
and
Shift
values.
•
Press
Save position
.
A pop-up window (Fig. 4-37) with the four position buttons will open.
•
Press the desired position.
A safety query will appear if the position has already been allocated. If you acknowledge with
Yes
, the
new position will be stored at the button selected.
TIC
The operating procedure for the TIC method
corresponds to that for C-DIC. What is different
though is that only the azimuth value needs to be
set. There is no
Zero
button.
The tab will not be available if no
motorized reflector turret is installed.
(5)
Tube lens tab
Depending on the type of tube lens turret
employed, up to four control elements may be
available for tube lens positions 1 to 4. If the tube
lenses have been configured, the names will be
displayed. The fifth position is always fitted with
the Bertrand lens.
The
BT
button serves to swivel the Bertrand lens in
and out.
•
In order to swivel the desired tube lens into the
optical path, the relevant button needs to be
pressed.
The tab will not be available if no
motorized tube lens turret is installed.
The active tube lens will only be
indicated in the status line (Fig. 4-23).
Fig. 4-38
TIC settings
Fig. 4-39
Microscope -> Revolver -> Tube lens