OPERATION
Axio Imager
Operating the motorized microscope via the touchscreen of the TFT display
Carl Zeiss
M70-2-0020 e 06/2009
430000-7344-001
111
Side Port
Eyepiece
Bino-
Shutter
Top Port Back Port
30/70%
Splitter 1:
50/50%
50/50%
50%
30%
35%
35%
−
2TV tube (Top Port/Back Port) and motorized camera path
deflection at Side Port are installed.
−
Three mirrors (deflection plane, eyepieces, Top Port/Back
Port) are active.
−
2TV tube (Top Port/Back Port) and motorized camera path
deflection at Side Port are installed
−
Two mirrors (deflection plane, eyepiece, Top Port) and a
dichroic beam splitter at the Back Port are active.
−
The active light paths are displayed in yellow, inactive light
paths appear in extra light gray (line width: 1 pixel).
−
The line width for the active light paths depends on the
respective quantity of light transmitted:
−
100%
= 4 pixels
−
50%
= 3 pixels
−
25 - 15% = 2 pixels
−
<15%
= 1 pixel
−
If a dichroic beam splitter is used, the light path to the top
port is shown in red, while the deflected one appears in
green. The line width is reduced by one pixel each.
Eyepiece
Bino-
Shutter
Top Port
Back Port
30/70%
Splitter 1:
50/50%
30%
35%
35%
−
2TV tube installed. Mirrors for eyepiece and Top Port/ Back
Port deflection are active.
−
No motorized camera path deflection at Side Port installed.
