OPERATION
Carl Zeiss
Switching microscope and HAL 100 illuminator on/off
Axio Imager
86
430000-7344-001
M70-2-0020 e 06/2009
Button for quick-action stage lifting to OPERATING POSITION (4-5/15 or 21)
−
On activation of this button, the stage will be moved into the focus position saved last.
You can abort the automatic travel of the stage to the load position/operating position by
pressing the button again or by pressing the
STOP
button on the TFT display.
4.3
Switching microscope and HAL 100
illuminator on/off
4.3.1.1
Switching on
•
Remove the dust covers from instrument.
•
Switch on the manual version of the microscope
at the on/off (4-9/
1
) switch located at the left
side of the stand. With the motorized
microscope, first switch on the power supply
VP232-2 at its on/off switch (4-10/
1
), and then
operate the on/off switch on the stand
(Position
I
).
•
Adjust the desired light intensity using the light
intensity control.
•
If you installed one HAL
100 halogen
illuminator each for reflected and for
transmitted light, use toggle switch (4-1/
36
) to
switch to the desired illuminator (reflected light:
toggle switch up; transmitted light: toggle
switch down).
The functioning of the light manager
depends on the setting of the toggle
switch.
4.3.1.2
Switching off
•
After use, switch the manual and the motorized
microscope off by means of the on/off switch
(4-9/
1
) on the left side of the stand. Then, on
the motorized version, switch off the power
supply VP232-2 at the on/off switch (4-10/
1
)
(Position
O
).
•
Cover the instrument with the dust covers.
Fig. 4-9
Switching the manual microscope
on/off
Fig. 4-10
Switching motorized microscope
and HBO 100 illuminator on/off
