OPERATION
Axio Imager
Mechanical Stage 75x50 mot. CAN
Carl Zeiss
M70-2-0020 e 06/2009
430000-7344-001
91
The CAN / USB converter may only be operated with the power supply unit provided by the
manufacturer.
The plug-type power supply is a protection class II device (totally insulated). If its housing is damaged, the
power supply unit needs to be put out of operation.
The plug-type power supply and the CAN / USB converter must not come into contact with moisture.
The USB/CAN converter is equipped with a plug-type power supply, which allows line voltages ranging
from 100 V to 240 V ±10 % (50 / 60 Hz) to be used, without requiring any change of voltage on the
unit.
4.6.4
Docking station
•
The docking station can only be used in
conjunction with the motorized stand.
•
If the microscope stand is inconvenient to
operate from the right-hand side, the functions
of the touch screen TFT display (4-18/
3
on the
docking station), the pushbutton ring to the
right (corresponds to 4-18/
2
on the docking
station) and the focusing drive to the right
(corresponds to 4-18/
1
on the docking station)
can be operated via the docking station,
detached from the stand.
•
Default button allocation can be altered via the
TFT display.
•
It is possible to change the angle of the TFT
display with the aid of the two knurled thumb
screws (see also 3-30/
4
) located on the back of
the docking station.
•
The coaxial drive (4-15/
4
) of the motorized
mechanical stage may be removed from the
latter (see Section 4.6.1). With the help of two
screws, it can be vertically fastened to the back
of the docking station.
Fig. 4-18
Docking station with TFT display,
pushbutton ring and focusing drive
