OPERATION
Axio Observer
Light Manager on the Axio Observer 5, 5 materials and …
ZEISS
12/2016
431004-7244-001
109
5.8
Light Manager on the Axio Observer 3, 3 materials
The Light Manager function can be used both in reflected and transmitted light.
The Light Manager performs the following functions:
−
Pressing the
LM-Set
button permanently saves the current brightness value of the objective in use, i.e.
the last value saved using the
LM-Set
button is set again after switching off the microscope and
switching it on again.
−
Separate values are stored for reflected and transmitted light.
−
TL
/
RL
toggle switch is on
RL
for reflected light:
A brightness value is stored for each nosepiece position.
−
TL
/
RL
toggle switch is on
TL
for transmitted light:
A brightness value is stored for each nosepiece position.
−
Dazzle protection function when changing the objective.
−
The default setting for the lamp voltage is 3 V for each objective position.
USB/CAN interface on Axio Observer 3, 3 materials stand for PC connection
After connecting a PC via the USB interface the following functions can be used via the software
programs AxioVision and ZEN (blue edition, core edition) which are installed on the PC:
−
Reading of nosepiece positions (position 1 to 6 of coded nosepiece)
−
Adjusting the brightness
−
Switching the Light Manager on and off including dazzle protection
−
Identifying reflected and transmitted light
Summary of Contents for Axio Observer Series
Page 1: ...Axio Observer Inverted microscope Operating manual...
Page 192: ......
