OPERATION
ZEISS
TFT display touchscreen on the Axio Observer 7, 7 materials
Axio Observer
124
431004-7244-001
12/2016
5.11.5.6
Light path
Below the
Light Path
tab, the light path of the
microscope is displayed schematically.
The following controls are available:
Active beam splitter: pressing this
button switches through the available
splitting ratios.
The diagram shown, or similar, is displayed in the
operating section to represent the light path. The
configuration is determined during initialization of
the microscope.
Two mirrors (sideport, frontport/baseport) are
active.
The active light paths are shown in yellow. The
width of the active light paths is a function of the
amount of light transmitted.
Pressing one of the icons (e.g.
Eyepiece/VIS
) will
cause the maximum possible amount of light to be
transmitted to this item.
Fig. 105
Microscope -> Control -> Light path
page
Fig. 106
Light path, two active mirrors, light
paths in yellow
Fig. 107
Light path, eyepiece/VIS active
Summary of Contents for Axio Observer Series
Page 1: ...Axio Observer Inverted microscope Operating manual...
Page 192: ......
