INSTALLATION INSTRUCTIONS AND FIRST-TIME SET-UP
ZEISS
Reflector turret
Axio Observer
58
431004-7244-001
12/2016
•
Tilt up the
excitation
half (Fig. 38/
1
), which
now is on top, and remove it from the retaining
elements (Fig. 38/
5b
) of the lower half
(
emission
4
).
•
Remove beam splitter (Fig. 38/
2
) and spring-
loaded frame (Fig. 38/
3
) from the lower half of
the module.
•
Remove the old beam splitter and carefully
place the new one on the spring-loaded frame
(Fig. 38/
3
) with the reflecting side facing up and
place both parts together into the lower half of
the module. Ensure that the catch on the side
of the spring-loaded frame is positioned in the
recess in the lower half of the module.
The reflective (coated) side (Fig. 40/
3
)
of the beam splitter has a beveled
edge (Fig. 40/
1
) or corner (Fig. 40/
2
).
•
Place the
excitation
half of the module
1
) on top of the
emission
half
4
) (retaining elements Fig. 38/
5b
engage with eyelets Fig. 38/
5a
). Holding the
two halves together, turn the module back into
the position for insertion.
•
Reinsert the slotted screws and screw tight.
•
Finally, attach the adhesive label with the name
of the filter combination to the side of the
module.
Fig. 39
Changing the beam splitter
Fig. 40
Labeling on the beam splitter
Summary of Contents for Axio Observer Series
Page 1: ...Axio Observer Inverted microscope Operating manual...
Page 192: ......
