INTRODUCTION
ZEISS
General Information
Axio Observer
6
431004-7244-001
12/2016
1
INTRODUCTION
Axio Observer microscopes have been designed, manufactured and tested in accordance with
DIN EN 61010-1 (IEC 61010-1) “Safety requirements for electrical equipment for measurement, control
and laboratory use”. They comply with RoHS directive 2011/65/EU.
The Axio Observer models 3, 5 and 7 for BIO-MED applications also comply with standard DIN EN 61010-
2-101 and the requirements of the EC Directive 98/79/EC annex 1 for IvD products (in vitro diagnostics)
and are marked with the
mark.
Axio Observer models 3 materials, 5 materials and 7 materials for material applications (MAT) meet the
requirements of the European low voltage directive 2014/35/EU and the EMC directive 2014/30/EU and
are marked with the
mark.
These Safety Instructions contain all information and warnings to be observed by the operator.
The devices must be disposed of in compliance with the WEEE Directive 2012/19/EU.
The following warning and information symbols are used in this Operating Manual:
CAUTION
This symbol indicates a potential hazard to the user.
CAUTION
Disconnect the instrument from the power supply before opening!
CAUTION
Optical radiation is emitted.
Do not look into the laser beam! It may be injurious to the eyes.
CAUTION
Energy-rich UV radiation!
Risk of injury to the eyes and skin!
CAUTION
Inflammable substances, fire hazard!
CAUTION
Hand and fingers can be caught.
CAUTION
Hot surface!
Summary of Contents for Axio Observer Series
Page 1: ...Axio Observer Inverted microscope Operating manual...
Page 192: ......
