Installation of the AxioCam MRc5
AxioCam MRc5 Instal Reference
29
How to correct the driver entry in the device
manager
NOTE:
In this chapter the correction of the driver entry is described with
Windows 2000 Professional screen shots, but the procedure is similar
under Windows 2000 Professional and Windows XP Professional.
If the entry in the
Device Manager
must be corrected, i.e. if a question mark
or an exclamation mark is in front of the
AxioCam MRc5
entry, proceed as
follows.
Please make sure that during all the steps described below, the CD-ROM
containing the AxioCam MRc5 driver remains inserted in the CD-ROM drive of
your computer.
Start the systems
Device Manager
:
Click
Start
⇒
Settings
⇒
Control Panel
.
Double-click the
System
icon. The
System Properties
dialog will be
displayed. Select the property page
Hardware
and click the
Device
Manager
button.
Under
Imaging devices
double-click on
Carl Zeiss AxioCam MRc5
.
