START-UP
ZEISS
Default factory settings of the microscope
Axiolab 5
78
430037-7444-001
05/2019
3.6
Default factory settings of the microscope
The default factory settings are:
−
Light Manager enabled, but no light intensity values saved
−
Light intensity set to initial minimum value
−
all configuration stored will be cleared
To reset the microscope to default factory settings, proceed as follows:
•
Press and hold down the
Intensity/LM
knob for 20 seconds.
While the knob is held down from 3 s to 20 s, the indicator light blinks RED.
It blinks GREEN after 20 s are reached. When the indicator stops blinking and remains GREEN, the reset
to the default factory setting is successful.
ATTENTION
Please use this function with caution as it will reset
all
existing configurations.
