OPERATION
Axiolab 5
Illumination and contrast methods in transmitted light
ZEISS
05/2019
430037-7444-001
83
(4) Setting the height stop on the condenser
carrier
•
Loosen the fastening screw (Fig. 4-4/
1
) of the
height stop using an Allen wrench (AF 3).
•
Use the focusing drive to focus on the
specimen.
•
Close the luminous-field diaphragm and focus it
by turning the vertical control (Fig. 4-4/
2
) of the
condenser.
•
Carefully raise the condenser slightly without
lifting the specimen.
•
Tighten the fastening screw (Fig. 4-4/
1
) of the
height stop.
Fig. 4-4
Setting the height stop on the
condenser carrier
