DESCRIPTION OF THE INSTRUMENT
ZEISS
Control and functional elements on microscope components
Axiolab 5
40
430037-7444-001
05/2019
2.5.3
Filter mount on luminous-field
diaphragm operating ring for filter
32x4 mm
−
Place the filter (Fig. 2-16/
2
) on the luminous-
field diaphragm operating ring (Fig. 2-16/
3
).
−
To secure the filter, insert the filter clamp
(Fig. 2-16//
1
) on the luminous-field
diaphragm operating ring.
−
To replace the filter, grip the recesses of the
filter clamp and pull it off the luminous-field
diaphragm operating ring.
2.5.4
Condensers
Condenser 0.9/1.25 BF, DF, Ph1, Ph2, Ph3
Condenser 0.9/1.25 BF (Fig. 2-17/
1
) with aperture
diaphragm (Fig. 2-17/
4
) with modulator disk
3
) for:
−
brightfield microscopy (BF)
−
darkfield microscopy (DF)
−
phase contrast microscopy (Ph 1, Ph 2, Ph 3)
Adjust the position of the modulator disk by
turning the knurled ring (Fig. 2-17/
2
).
This condenser is also available without a
modulator. disk, i.e. only for brightfield
microscopy.
Condenser 0.9/1.25 BF
Condenser 0.9/1.25 BF (Fig. 2-18/
1
) with aperture
diaphragm (Fig. 2-18/
2
) for brightfield microscopy.
This condenser is also available with a modulator
disk.
Fig. 2-16
Filter mount on luminous-field
diaphragm operating ring for filter
d=32x4 mm
Fig. 2-17
Condenser 0.9/1.25 BF, DF, Ph1, Ph2,
Ph3 with modulator disk
Fig. 2-18
Condenser 0.9/1.25 BF
