Axiolab A
Carl Zeiss
B 40-015 e 06/99
3-19
3.5.1
Attachment of Photomicrography Equipment
(1)
Attachment of SLR Camera, e.g. CONTAX 167 MT
•
Screw T2 adapter for the CONTAX bayonet (3-
16/
3
) on the 2.5
×
connector for T2 (3-16/
4
)
(456005-0000-000).
•
Attach the camera housing (3-16/
2
) and the
cable release (3-16/
1
), if required.
•
Loosen the three hexagonal screws (3-16/
6
) to
remove the dust cover (3-16/
8
) from the
camera tube (3-16/
5
) and insert the
premounted unit A in the camera tube.
•
Align the camera unit in the required position
and tighten the three hexagonal screws (3-
16/
6
).
•
Pull out pushrod (3-16/
7
) completely for
photomicrography.
•
When artificial-light color reversal film is used,
the CB 3 conversion filter provides the correct
color temperature of 3200 K.
•
For daylight color reversal film, the CB 12
conversion filter must be used in addition to the
CB 3 conversion filter.
☞
If focusing is not to be made via the
viewfinder of the camera, the
component with the eyepiece reticle
must be screwed in the eyepieces (see
sections 1.5 and 2.3.1).
Fig. 3-16
Attachment of SLR camera, e.g.
CONTAX 167 MT
Summary of Contents for Axiolab A
