Carl Zeiss
Axiolab A
4-4
B 40-015 e 06/99
4.2
Troubleshooting
Troubleshooting on the Axiolab A microscope is limited to only a few actions:
•
Checking the line cable
•
Checking the set instrument voltage and changing the fuses
•
Checking the illumination and changing the lamp
−
Defective fuse(s)
→
change the fuses according to paragraph (
1
)
−
defective halogen lamp
→
change the lamp according to paragraph (
2
) or (
3
)
(1)
Check the Line Cable and Fuses and
Change Fuses
Make sure to disconnect the instru-
ment from the line first!
•
Check line cable (4-1/
1
) and replace it, if
required.
•
Use 2.0 mm watchmaker’s screwdriver to press
the two springs at the side of the fuse holder
(4-1/
2
) to the inside via the groove and remove
fuse holder.
•
Check fuse inserts (4-1/
3
) and replace defective
fuses with new ones. Make sure to use only
T 0.8 A; 250 V; 5
×
20 mm fuses!
•
Insert fuse holder again until the springs at the
side can be heard to engage.
•
Connect the instrument to the line.
Fig. 4-1
Changing the fuses
Summary of Contents for Axiolab A
