START-UP
ZEISS
Mounting optional components
Axioscope 5/7/Vario
72
430035-7344-001
03/2018
3.2
Mounting optional components
CAUTION
Always disconnect the stand and the external power supply units from the power mains
before beginning any mounting work.
3.2.1
Mounting the intermediate plate
for Analyzer Slider
•
Loosen the screw (
5
) with the Allen
wrench (AF 3) and lift off the tube (
1
).
•
Use the included ring tool to unscrew the tube
lens (accessible from the bottom) and keep it
free of dust.
•
Screw the tube lens included with the
intermediate plate into the tube.
•
Insert the intermediate plate (
2
) with
the dovetail ring into the stand socket
(
6
), adjust it, then fasten it with the
Allen screw (
4
).
•
Insert the analyzer slider into the slider slot
(
3
) if applicable.
•
Slightly incline the binocular tube (
1
)
when inserting it into the intermediate plate,
adjust it and fasten it with the Allen screw
(
4
).
Fig. 3-39
Mounting the binocular tube with
intermediate plate
