START-UP
Axioscope 5/7/Vario
Mounting optional components
ZEISS
03/2018
430035-7344-001
77
3.2.7
Mounting and centering the low-
power system for 2.5x/4x
objectives
•
If necessary, remove the polarizer or filter holder
from the condenser carrier.
•
Hold the low-power system (
4
) parallel
to the bottom of the condenser carrier
(
3
) and screw the bracket bolt
6
) of the low-power system with the
angled adjustment lever (
7
) into the
front threaded opening to the left below the
condenser carrier (
3
) until it stops.
•
With the adjustment lever, (
1
) screw
the stop bolt (
2
) into the rear threaded
opening of the condenser barrier (
3
)
to the stop.
•
Swing the low-power system into the beam
path. Make sure that the fixture is securely
engaged.
•
Open aperture diaphragm and field diaphragm
completely.
•
Adjust both adjustment screws (
5
) with the aid of two Allen wrenches (AF 1.5) until the field
of view is well lit.
NOTE
The low-power system is useful in only combination with the 0.9/1.25 condenser.
Fig. 3-47
Mounting the low-power system
