START-UP
ZEISS
Mounting standard components
Axioscope 5/7/Vario
62
430035-7344-001
03/2018
3.1.18
Mounting the Axioscope base plate on the stand
NOTE
When using the HAL or HBO illuminators, a base plate for Axioscope (000000-2202-526) is
mandatory.
Fig. 3-28
Mounting the base plate
•
Remove the four rubber feet (Fig. 3-28/
1
) from the bottom of the stand.
•
Align the base plate (Fig. 3-28/
2
) with the stand and insert a hexagonal socket screw (M6) (Fig. 3-28/
3
)
into each of the four holes in the base plate.
•
Tighten the screws (M6) with an Allen wrench to fix the base plate to the stand.
