Axiotech and Axiotech
vario
Carl Zeiss
B 40-020 e 06/99
2-23
2.12.2
Attachment of 12 V 100 W halogen
illuminator, adjustment and
change of 12 V 100 W halogen
lamp
(Axiotech 100 and Axiotech
vario
100)
a)
Attachment of 12 V 100 W halogen
illuminator
•
Loosen hexagonal screw (2-29/
2
) using ball-
headed screwdriver (2-29/
1
) and remove dust
protection cap (2-29/
3
).
•
Attach 12 V 100 W reflected-light halogen
illuminator (2-29/
5
) with dovetail guide (2-29/
4
)
and tighten hexagonal screws (2-29/
2
) using
the ball-headed screwdriver (2-29/
1
).
•
Connect cable (2-29/
6
) with the two sockets
(2-29/
7
) on the instrument rear.
•
Attach connection cable (2-29/
6
) of halogen
illuminator to the cable clamp (2-29/
8
).
☞
Since the power supply is not
integrated in the stand of the
Axiotech
vario
, the 12 V 100 W halogen
illuminator must be connected to the
external 12 V DC 100 W power unit
(also see section 2.11.3).
Fig. 2-29
Attachment of 12 V 100 W halogen
illuminator
Summary of Contents for Axiotech
