ZEISS
3 Product and Functional Description | 3.2 Controls and Functional Elements on Components
3
.2.4 Nosepiece with Objectives
Purpose
The nosepiece is used to hold the objectives and to swivel the desired objective into the beam
path.
Position
The nosepiece is mounted on the lower part of the stand.
The following features and controls are available:
§
encoded nosepiece with M27 mounting thread for six objectives
The following objectives are installed:
§
§
§
§
Pos. 1: Objective LD A-Plan 5x/0.15 Ph1 M27 (FWD = 11.7 mm at CG = 1 mm polystyrene)
Pos. 2: Objective LD A-Plan 10x/0.25 Ph1 M27 (FWD = 8.5 mm at CG = 1 mm polystyrene)
Pos. 3: Objective LD A-Plan 20x/0.35 Ph1 M27 (FWD = 4.9 mm at CG = 1 mm polystyrene)
Pos. 4: Objective LD A-Plan 40x/0.55 Ph1 M27 (FWD = 2.3 mm at CG = 1 mm polystyrene)
1
2
3
4
Fig. 5: Nosepiece with objectives
1
3
Nosepiece
Cover cap
2
4
Objective
Knurled ring for swivelling the nose-
piece
Instruction Manual ZEISS Axiovert 5 digital | en-US | Rev. 1 | 431030-7021-101
21
