INTRODUCTION
Carl Zeiss
General information
Fluar Illuminator Z mot.
6
435180-9060-701
05/2012
1
INTRODUCTION
1.1
General information
Fluar Illuminator Z mot. and the Axio Zoom.V16 microscope have been designed, manufactured and
tested in compliance with DIN EN 61010-1 (IEC 61010-1) and IEC 61010-2-101 Safety requirements for
electrical equipment for measurement, control and laboratory use.
The Fluar Illuminator Z mot. and Axio Zoom.V16 zoom microscope meet the requirements of EC Directive
IvDD 98/79/EC (In vitro diagnostic medical devices); they are marked with the
mark.
The operating manual contains all information and warnings the operator must comply with.
The following warning and information symbols are used in this operating manual:
CAUTION
This symbol indicates a potential hazard to the user.
CAUTION
Optical radiation is emitted. Do not look into the laser beam!
This may be harmful to the eyes (see Section 2.3).
CAUTION
Risk of pinching!
CAUTION
Hot surface!
CAUTION: High-energy UV radiation!
Risk of injury to eyes and skin!
CAUTION
Disconnect the instrument from the power supply before opening!
ATTENTION
This symbol indicates a potential hazard to the instrument or system.
NOTE
This symbol indicates an instruction which requires particular attention.
Summary of Contents for Fluar Illuminator Z mot.
Page 1: ...Operating Manual Fluar Illuminator Z mot for Axio Zoom V16...
Page 2: ......
Page 22: ......
