background image

 
 
 
 
 
 

Safety 

Microscope Illuminating System  

Carl Zeiss 

General, EMC 

HBO 100 

 

 

B 46-0063 e  03/06 

Notes on Safety 

1.1 General 

Please make yourself familiar with the contents 
of these operating instructions before attaching 
and starting up the HBO 100 Microscope 
Illuminating System. Additional information is 
available from our maintenance service or from 
authorized agencies.  

The HBO 100 Microscope Illuminating System 
should be used with Zeiss microscopes 
exclusively. 

The HBO 100 Microscope Illuminating System 
may only be handled by trained personnel. 

To ensure that the illuminating system functions 
properly with the microscope, the appropriate 
microscope manual must be observed. 

In addition, observe the manual  
"

HBO 100

 

– Electronic ballast“

.  

Special regard must be paid to the notes on 
instrument safety included in this manual. 

The data sheets from the lamp manufacturers 
must be observed when the HBO 103 lamps are 
operated.  

To guarantee the safe operation and function 
of the HBO 100 Microscope Illuminating 
System, it is necessary under any circumstances 
to take the precautions and observe the 
warnings contained in the operating 
instructions. 

 

 

The following warning and information symbols 
are used in this manual: 

 

CAUTION!

 

Non-observance of the safety notes constitutes 
a hazard for the user.  

 

CAUTION! 

Dangerous electrical voltage. 

 

CAUTION! 

Disconnect the instrument from the line before 
opening it!

 

 

CAUTION! 

Hot surface. 

 

CAUTION!

 

Non-observance of the safety notes constitutes 
the risk of damage to the instrument. 

 

NOTE! 

Notes which must be observed when using the 
HBO 100 Microscope Illuminating System. 

 

1.2 Regulations 

concerning 

Instrument Safety and 
Electromagnetic 
Compatibility (EMC) 

 

The HBO 100 Microscope Illuminating System 
has been designed, produced and tested in 
compliance with EN 61010, Part 1 (VDE 0411). 
It was delivered in a technically safe and perfect 
state. 
The illuminating system meets the requirements 
of EC directives 73/23 and 89/336 and the EMC 
legislation, as amended on September 18, 
1998.  
Radio-noise suppression complies with 
EN 55011, Class B, noise immunity with 
EN 61326. 
Compliance with the EC directives mentioned is 
documented by the CE certificate. 
 

 

Summary of Contents for HBO 100





















Reviews: