LSM 510
OPERATION IN EXPERT MODE
LSM 510 META
Acquire Menu
Carl Zeiss
03/06
B 45-0021 e
4-43
Recording of microscope settings
The upper part of the
Microscope Control
window shows the recording functionality of
microscope configurations.
Complete microscope configurations can be
created and applied.
The
Store
button permits existing microscope
configurations to be stored under any name.
The
Apply
button permits existing stored
microscope configurations to be loaded.
The
Delete
button permits existing microscope
configurations to be deleted.
The
Assign
button permits the assignment of a
microscope configuration to a button
.
Load a microscope configuration
An existing microscope configuration can be
loaded as follows:
•
Click on the
arrow
button.
−
This opens a list box of all stored microscope
configurations.
•
Browse through the microscope configurations
by clicking, or use the scroll bar at the side of
the list box.
•
Click on the desired microscope configuration.
−
The selected microscope configuration is shown in the first line of the
Microscope Configurations
list box.
•
Click on the
Apply
button.
•
Click on the
Close
button to close the microscope window.
Only those microscope settings which are encoded and motorized can be reloaded.
Store a Microscope Configuration
A newly created or changed microscope configuration can be stored under a new name as follows:
•
Enter the desired name in the first line of the microscope setting list box.
•
Click on the
Store
button.
•
The actual configuration with the chosen name is added to the microscope settings list.
•
Click on the
Close
button to close the microscope window.
Fig. 4-27
Axio Imager.Z1 Control window
