LSM 510
OPERATION IN EXPERT MODE
LSM 510 META
Acquire Menu
Carl Zeiss
03/06
B 45-0021 e
4-49
Delete a microscope configuration
A no longer required microscope configuration can be deleted as follows:
•
Select the microscope configuration to be deleted from the microscope configuration list box.
•
Click on the
Delete
button.
•
Click on the
Close
button to close the microscope window.
Assignment of a microscope configuration to a button
A microscope configuration can be assigned to a button as follows:
•
Click on the
Assign
button.
•
This opens the
Assign-Microscope-Settings-To-Button
window.
•
Click on the arrow in the
Button
list box and select a button out of the list.
With increasing numbers the buttons are arranged from the upper to the lower row from left-
hand side to right-hand side.
•
Click on the arrow in the
Settings
list box and select a microscope configuration.
•
Click on the
Apply
button. A new button with the name of the selected microscope configuration has
been created.
•
Click on the
Close
button to close the
Assign-Microscope-Settings-To-Button
window.
•
Click on the
Close
button to close the microscope window.
Conventional setting of the microscope Axiovert 200 M
For the conventional setting of the Axiovert 200 M, proceed as follows:
•
Click on the
VIS
button in the
Acquire
subordinate toolbar.
•
Place specimen on microscope stage.
−
The cover slip must be facing down.
•
In the
Objective
list box, select the required objective.
•
Use the focusing drive (4-32/
4
) to focus the required specimen plane.
•
Select specimen detail by moving the stage in X and Y via the XY stage fine motion control (4-32/
3
and
2
).
