OPERATION IN EXPERT MODE
LSM 510
DuoScan
Carl Zeiss
Acquire Menu
LSM 510 META
DuoScan
4-58
B 45-0021 e
03/06
(3)
Beam path - Emission filter
•
On the
Beam Path and Channel Assignment
panel, click on the
emission filter symbol.
−
This opens a graphical pop-up window of all
available emission filters (e.g. BP for band
pass, or LP for long pass) with their
wavelengths.
•
To select an emission filter, click on the
respective filter in the pop-up window.
−
The emission filter selected moves into the
beam path in front of the PMT
photomultiplier.
•
Depending on the application, it may be
necessary to insert additional mirrors, secondary
dichroic beam splitters or neutral glass filters
between the HFT main dichroic beam splitter
and the PMT photomultiplier. To select these
components, click on the respective
symbols.
For channels 1 and 2, it is possible to
change the filters directly on the LSM 510
scan module (see CHAPTER ANNEX: Filter
Change in the Detection Beam Path of
Channels 1 and 2 of the printed manual).
(4)
Beam path - Activation / Deactivation of
Channels and Channel Color Assignment
•
On the
Beam Path and Channel Assignment
panel, click on the channel symbols, e.g.
.
−
This opens the
Channel Color Selection
window on the Beam Path and Channel
Assignment panel.
•
Click on the desired color bar.
This changes the color of the channel symbol.
•
To close the
Channel Color Selection
box,
click on the
Close
button.
Fig. 4-40
Configuration Control window
Fig. 4-41
Channel Color Selection window
