OPERATION IN EXPERT MODE
LSM 510
DuoScan
Carl Zeiss
Acquire Menu
LSM 510 META
DuoScan
4-102
B 45-0021 e
03/06
Check box (e.g.: 1 - 4): Clicking on this check box allows a ROI to be deactivated.
The tick disappears from the check box, as does the relevant marked area from the
scanning image. Clicking on the check box again will reactivate the ROI.
Arrow
button: Activation of the mouse button to change the size or move the
ROIs in the
Image Display
window.
Rectangle
button: Draw of a rectangle in the
Image Display
window; click and
keep mouse button pressed, drag the rectangle in any direction, let go off the
mouse button to end the procedure.
Bezier
button: Draw of a bezier figure in the
Image Display
window; first click
sets the starting point, each additional click adds a line, double-click on the
starting point closes the figure and ends the procedure.
Ellipse
button: Draw of an ellipse in the
Image Display
window; first click sets
the center point, displayed line permits determination of the extension, second
click sets the first dimension, then the second dimension and the rotation direction
can be determined, third click sets the second dimension and direction and ends
the procedure.
Circle
button: Draw of a circle in the
Image Display
window; click and keep the
mouse button pressed to set the center point, drag the diameter, let go off mouse
button again to end the procedure.
Polyline
button: Draw of a polyline figure in the
Image Display
window; first
click sets the starting point, each further click adds a line, double-click on the
starting point closes the figure and ends the procedure.
Recycle bin
button: All the ROIs dragged to the scanning image are deleted. If an
area outline was marked before, this area is now deleted in the scanning image.
Auto / Color
button: A defined color from the list of colors can be assigned to the
ROIs. In that case, the same color is assigned to all the individual figures. In the
Auto
position, the outlines of the dragged ROIs are automatically colored
differently.
Line
button: This button allows you to determine the line thickness of the area
outline. This is for display purposes only. The scanned line is not effected.
Fit Frame Size to bounding Rectangle of all ROIs
check box: If this check box
is ticked, the scan procedure is displayed only within a rectangle which is defined
by the greatest extension in X and Y of all the individual figures together, i.e. the
pixel number and the data quantity of the
Image Display
window are reduced.
•
In the toolbar of the
Interactive ROI Definition
panel, click on the symbol of the area you want to
use to mark the region of interest in the scanning image. Five different area symbols are available in
the form of buttons.
