LSM 510
OPERATION IN EXPERT MODE
LSM 510 META
Process Menu
Carl Zeiss
03/06
B 45-0021 e
4-139
(5) User-defined
filter
The
User-defined
function permits you to create
your own filters. In addition to the
Kernel Size
,
the parameters
Factor
,
Divisor
and
Offset
can be
modified here.
The filter result can be subtracted from the original
image via the
Subtract from Source
check box.
Proceed as follows to store
User-defined
filters:
•
Click on the
Add To List
button and enter a
name in the
Add Filter To List
window. The
name will be included in the
Filter List
.
Proceed as follows to activate stored,
User-
defined
filters:
•
Click on the name of the filter in the
Filter List
.
The filter will then be activated immediately.
Proceed as follows to delete
User-defined
filters:
A
•
Click on the name of the filter in the
Filter List
and then on the
Remove
button. The filter will
be deleted.
•
After selection of the required filter, click on the
Apply
button to start the filter procedure.
−
Filtering will be performed and displayed in
the current
Image Display
window.
•
In the case of images with several channels,
activate the
xy
button in the
Display
image
toolbar to display all the channels. Each channel
must be filtered separately.
•
Use the
Save As
function to store the newly
created image.
Fig. 4-122
Filter window (User-defined filter)
Fig. 4-123
Add Filter to List panel
