Zeiss LSM 510 Manual Download

Page: 297 / 606

LSM 510

OPERATION IN EXPERT MODE

LSM 510 META

Maintain Menu

Carl Zeiss

03/06

B 45-0021 e

4-235

•

Enter the data of the new objective in the

Create new Objective

window, then click on

the

Apply

button.

The new objective is stored in the database and
included in the

Change

Objectives

window. You

can now activate the new objective as a favorite
objective using the procedure described above.

If you have activated the

Non Zeiss

check box, objectives from other
manufacturers can also be included in the
database.

(2) Remove

Objective

You can only remove objectives in the

User Defined Objectives

directory.

•

To remove an objective from the database, select it with a click of the mouse in the

Change

Objective

panel and then click on

Remove Objective

. The objective is removed from the list.

•

Click on

Close

to close the

Remove Objective

window.

(3) Edit

Objective

You can only edit objectives in the

User Defined

Objectives

directories.

•

To edit an objective from the database, select it
with a click of the mouse in the

Change

Objective

panel and then click on

Edit

Objective

. The

Edit user defined Objective

panel will open and the parameters of the
Objective can be edited.

•

Click on

Close

to close the

Edit user defined

Objective

window.

Fig. 4-232

Create new Objective window

Fig. 4-233

Edit user defined Objective window

Summary of Contents for LSM 510































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for LSM 510

Reviews:

Related manuals for LSM 510

Brands by name

Popular brands

Zeiss LSM 510, Manual

Search results

Summary of Contents for LSM 510

Reviews:

Related manuals for LSM 510

Brands by name

Popular brands