LSM 510 AND LSM 510 META - SETUP REQUIREMENTS
LSM 510
DuoScan
Carl Zeiss
Space Requirements
LSM 510 META
DuoScan
2-8
B 45-0021 e
03/06
2.1.6
LSM prepared for Two Photon Laser (NLO)
2.1.6.1
Coherent "Chameleon" or Spectra Physics “Mai Tai”. Directly-coupled to upright or
inverted Microscope: 2,5 m x 4 m
Fig. 2-7
Space requirements for Two Photon Laser and
Small NLO System Table
(measurements in mm)
The System Electronic Rack contains all electronics for control of the hardware components of the
system, the power supply for the microscope, the scanning unit and the Laser Module RGB equipped
with the choice of lasers. The Laser Module RGB is set on top of the System Electronic Rack. Power supply
and cooling unit of the NLO Laser can be stored under the system table. With the extension of LSM
DuoScan
(VIS and/or 405 nm) the Laser Module LIVE is situated in the System Electronic Rack. The
electronics for the NLO laser have to be set aside the System Electronic Rack. An additional lab cart
(000000-0465-515) is recommended. With the extension of the LSM
DuoScan
UV only additional space is
required to set up the UV laser (see chapter 2.1.4).
